Filter
Top Products
DIGITAL SYSTEM AMPLIFIER
Owner‘s Manual 13
3.3 Standby Mode (POWER REMOTE)
POWER REMOTE provides a simple way to remotely power-on/off the power amplifier. The POWER
REMOTE function is only useful for appliances not employing a Remote Control Modul. Controlling DSA
amplifiers with Remote Control Module installed per POWER REMOTE is not recommended.
Leaving the pins of POWER REMOTE socket open the appliance power is switched on. When connecting
the pins the applicance enters standby mode.
3.4 Fan Cooling
The power amplifier has two fans. The fans are switched in three performance-optimized levels, i.e. they are not running
permanently but the speed of the fans is controlled depending on the temperature. That in return ensures very silent running
during idle state.
The temperatures of the power amps‘s channels are registered and monitored individually.