Filter
Top Products
7
XD7500 OPERATION
General Operation
Press and hold DISP then press TUNE
ll
to select radio
frequency (tuner mode) or CD elapsed time/track (CD player
mode) display priority (default). Clock is accessed by pressing
DISP momentarily.
Press and hold DISP then press TUNE
nn
to select clock
display priority. Radio frequency or CD elapsed time/track is
accessed by pressing DISP momentarily.
Programs unit to display clock/no clock when unit is off.
Press and hold MODE then press PRESET 1 to turn clock
priority on/off.
Press and hold for more than 2 seconds to RESET the unit
upon initial installation or if abnormal operation occurs.
Press AUD to select between Volume (default), Bass, Treble,
Balance & Fader.
Press AUD until BAS appears
Rotate encoder left/right to adjust
(+6 maximum / -6 minimum)
Press AUD until TRE appears
Rotate encoder left/right to adjust
(+6 maximum / -6 minimum)
Press AUD until BAL appears
Rotate encoder left/right to adjust
(BAL.L 12-BAL 00-BAL.R 12) BAL 00 represents equal balance.
Press AUD until FAD appears
Rotate encoder left/right to adjust
(FAD.F 12-FAD 00-FAD.R 12) FAD 00 represents equal fader.
Individual Bass and Treble settings are retained in memory for
AM/FM and CD/AUX modes.
Press AUD for 3 seconds to turn confirmation beep on/off.
Press MUTE to silence the audio. Press MUTE again to cancel.
Programmable Display
Priority
Programmable Clock
Priority
Reset
Audio
Bass
Treble
Balance
Fader
Source Audio Memory
Confirmation Beep
Mute