Filter
Top Products
6
XD7500 OPERATION
General Operation
Press PWR or any other button (except EJECT or OPEN) to turn
the unit on. Inserting a CD will turn the unit on automatically.
Press PWR to turn the unit off.
With the unit off, press OPEN to allow the front panel to slide
down. Gently squeeze the release tab located on the bottom
center underside and pull faceplate down and away from unit
to remove. To install, insert left side faceplate first, then push
right side to secure.
Before installation, remove trim ring and install supplied
Phillips head #1 screws through left and right underside of
faceplate tray into faceplate.
Press MODE to select between tuner, CD player and auxiliary
input. Modes of operation are indicated in the display.
Press LOUD to activate and deactivate loudness contour curve.
Activating this feature will enhance the bass frequencies when
listening to music at all volumes.
Adjust volume using rotary encoder (00-46).
Press and hold PWR for 3 seconds to program currently
selected volume level.
Press EQ to select between POP, JAZZ, CLASSIC, BEAT, ROCK
and OFF (default) equalization curves. Any adjustment to the
Bass or Treble settings automatically cancels the current EQ
curve.
Press DISP to select between clock and radio frequency (tuner
mode) or CD elapsed time/track (CD player mode).
With the unit on, press and hold DISP until clock begins to
flash, then release. Press TUNE
nn
to adjust the hours and
TUNE
ll
to adjust the minutes. Press DISP momentarily to
save the selected time.
The clock will display 12-hour time in U.S. frequency spacing
mode (PM 10
:
00). In European frequency spacing mode, the
clock will display 24-hour time (22
:
00).
Power On/Off
Faceplate Removal
Semi-permanent
Faceplate Installation
Mode
Loudness
Volume
Programmable
Turn-On Volume
Preset EQ Curves
Display
Set the Clock
12/24-hour Clock