Dual XD1222 CD Player User Manual


  Open as PDF
of 12
 
9
Troubleshooting
Problem Cause Action
Yellow wire not connected or incorrect voltage
Red wire not connected or incorrect voltage
Checkconnectionsforpropervoltage
(11~16VDC)
Blackwirenotconnected Checkconnectiontoground
Fuse blown Replace fuse
Speakerwiresnotconnected Checkconnectionsatspeakers
Oneormorespeakerwirestouchingeach
other or touching chassis ground
Insulateallbarespeakerwiresfrom
each other and chassis ground
Yellow or red wire touching chassis ground Checkforpinchedwire
Speakerwirestouchingchassisground Checkforpinchedwire
Incorrect fuse rating Use fuse with correct rating
Unitisnotmountedcorrectlyorbackstrapis
not secure
CD mechanism position out of alignment
CD transit screws still in place
Checkmountingsleeveandbackstrap
support
Physicaldefectinmedia(CD,CD-RorCD-
RW) Checkmediaforscratches
PressEJECTfor3secondstoreset
CD mechanism position
Remove 2 transit screws located on top
of the unit.
Unit will not turn on
(nopower)
Unit has power
(butnosound)
Unit blows fuses
Excessiveskipping
Unit will not accept
a disc
Error Codes
Error Code Cause Action
ER-1appearsondisplay Disc error PressejectorRESET
ER-2 appears on display Mechanism error PressejectorRESET
ER-3 appears on display Servo error or disc is in upside down PressejectorRESET
XD1222 OPERATION
 previous next