Dual XD1222 CD Player User Manual


  Open as PDF
of 12
 
5
General Operation
Press RELEASE and pull away from the left side to remove.
Tore-install,insertrightsideoffaceplatefirstthenpushleft
side to secure.
Removetrimringandinstallsupplied#1x7/32”Phillipshead
screw through left side of mounting frame into faceplate.
Press PWR to turn the unit on. Inserting a CD will turn the
unit on automatically. Press PWR to turn the unit off.
Press MODE to select between AM/FM, CD or auxiliary input.
Modes of operation are indicated in the display.
Press and hold LOUD for 2 seconds to activate and deactivate
the loud feature. Activating this feature will enhance the
bassandtreblefrequencieswhenlisteningtomusicatlow
volumes.
Inserta3.5mmconnectorinthefrontpanelAUXport.
Connecttheotherendofthe3.5mmconnectortothe
headphone output of an audio device, MP3 player, etc. Press
MODEtoselectAUXmode.
Adjustvolumeusingthe rotary encoder(00-46).
Press DISPtodisplaytheclock.Theradiofrequency(tuner
mode)andCDtrack/elapsedtime(CDplayermode)willbe
shown by default.
Press DISPtodisplaytheclock,thenrelease.Pressand
hold DISPfor2seconds,theclockwillbegintoflash.Press
TRACK
nn
toadjustthehoursandTRACK 
ll
toadjust
theminutes.Clocksettingswillbesavedafter5seconds.
Theclockwilldisplay12-hourAM/PMtimeinUSAfrequency
spacingmode(PM10:00).InEuropeanfrequencyspacing
mode,theclockwilldisplay24-hourtime(22:00).
Press and hold for more than 2 seconds to RESET the unit
uponinitialinstallation.TheRESET button is located behind
the faceplate.
Faceplate Removal
Semi-permanent Faceplate 
Installation
Power On/Off
Mode
Loud
Auxiliary Input
Volume
Display
Set the Clock
12/24-hour Clock 
Reset
XD1222 OPERATION
 previous next