Filter
Top Products
®
BTV30 BLUETOOTH SPEAKERPHONE
®
Press during a phone call to transfer audio between the BTV30 and a phone.
Tip: Transfer audio to the phone before turning the BTV30 off.
Transferring a Call
The unit allows two options for answering an incoming call while on an active call:
• To place the current call on hold and answer an incoming call, press and
hold
JOG to the right for two seconds. The unit will beep, and the
incoming call will become active. To return to the original call, press and hold
JOG to the right for two seconds.
• To end the current call and answer an incoming call, hold JOG to the
left for two seconds until the unit beeps. The incoming call will become active
and the current call will be released.
Call Waiting
To adjust the volume level, press JOG to the left to decrease volume or to the right
to increase volume.
Note: the volume can only be adjusted during a call.
Volume
5
OPERATION
To mute the microphone during a call, press in on JOG once. To turn off the mute
function, press in on JOG one more time.
Mute
To reset the unit to its factory settings, press and hold for approximately eight
seconds. "RESET" will appear in the display.
Note: When the unit is reset, many user settings will be deleted, including paired
device information, selected ring tone and incoming call list. No phone numbers
will be deleted from the phone book when the unit is reset. Please refer to page 9
for instructions for resetting the phone book.
Reset