Dolby Laboratories 585 Stereo System User Manual


 
Model 585 Time Scaling Processor Reference Data
7-3
Dynamic Range
>110 dB
Delay
400 to 480 ms, user-selectable
Digital Audio Inputs
Four BNC female connectors with loop-through, 75, unbalanced, signal levels per
AES-3ID-1995/SMPTE 276M specifications
Digital Audio Outputs
Four BNC female connectors, 75, unbalanced, signal levels per AES-3ID-
1995/SMPTE 276M specifications
AES Reference Input
BNC female with loop-through, 75, unbalanced, signal levels per AES3-ID
Audio Word Length
Up to 24 bits
Serial Remote Control Input
Rear: RS-232, 9-pin female D-connector
Auxiliary Ports
Rear: Two 9-pin female D-connectors, RS-422, full duplex
Metadata Input/Output Ports
Rear: 9-pin female D-connector, 115 kbps, pinout per SMPTE 207M (RS-485)
General Purpose Input/Output (GPI/O) Port
Rear: 9-pin female D-connector, 0 to 5 V TTL levels
Ethernet Port
Rear: RJ-45 female connector, 10Base-T
Power Requirements
90 to 264 VAC, 50 to 60 Hz, 15 W maximum; designed to operate from a centrally
switched power source