Filter
Top Products
Model 585 Time Scaling Processor Getting Started
2-5
2.4.1 Reading the Display
After powering up, Model 585 displays the main status menu.
The factory default is:
5.1 + 2 Sens=5
+0.0
The main status menu shows you:
• On the upper line, the program configuration and the sensitivity level. In this
example,
5.1 + 2 defines two programs: Program 1, a 5.1 mix; and
Program 2, a two-channel mix. The sensitivity level is set to 5.
• The amount of pitch shifting on the lower line, +0.0%, indicates no shift.
2.4.2 Buttons
The six buttons in Figure 2-4 display window control navigation through the menus
and selection of parameters within menu screens. Press any button to use the
command listed below it.
Esc
Enter
Setup
Setup
Shift
Status Bypass
Figure 2-4 Front-Panel Buttons
Note: In the Transport menu, some buttons are redefined to trigger functions not
available in all other menus. For more details, see Section 3.1, Transport
Menu.