1133
© 2005 Directed Electronics, Inc. all rights reserved
CEA SPECIFICATIONS
DD660000
Power Output: 180 Watts RMS x 1 at 4 ohms and <
1% THD+N
Signal to Noise Ratio: -60 dBA (reference 1 Watt into 4 ohms)
Additional Power: 300 Watts RMS x 1 at 2 ohms and <
1% THD+N
DD880000
Power Output: 200 Watts RMS x 1 at 4 ohms and <
1% THD+N
Signal to Noise Ratio: -60 dBA (reference 1 Watt into 4 ohms)
Additional Power: 400 Watts RMS x 1 at 1 ohm and <
1% THD+N
LED TUBE INSTALLATION (OPTIONAL)
This Directed Audio amplifier has been designed with a custom heat sink that can
accommodate two (optional—not supplied) LED tubes.
Follow the installation instructions provided with the LED tubes.
Directed Amplifier—LED Cross Reference Chart
Directed Part Number Directed Model Directed LED Model
45095 D600 DIRW9L
45100 D800 DIRW9L
Use the following cross reference chart to select the proper length LED tube for use
with your Directed Audio amplifier.
crossover settings the way you like.
Test discs and analyzers may help
with this process, but in the end it's
your ears that count --listen to the
music!