Directed Electronics 2500 Stereo Equalizer User Manual


 
9
© 2002 Directed Electronics, Inc
FIGURE 2—CONTROL PANEL
volume of the system and affects all
line level outputs to the amplifiers.
FFaaddeerr -
To set the master volume/
fader control knob to the fader posi-
tion, pull gently on it until a notched
position is reached. It will then
control the front-to-rear balance of
the front and rear RCA output jacks.
WWAARRIINNGG!!
DO NOT use excessive force when using this knob
or damage to its release mechanism may result.
2.
PPoowweerr OOnn//OOffff LLEEDD
- This LED will
be illuminated when the 2500 is
on.
3.
IInnppuutt SSoouurrccee SSwwiittcchh
- The input
source switch selects between
Source 1 and Source 2 inputs.
4
SSuubbwwooooffeerr VVoolluummee CCoonnttrrooll
: The
subwoofer volume control knob
controls the volume of the dedi-
cated subwoofer output.
5.
SSuubbwwooooffeerr FFrreeqquueennccyy CCoonnttrrooll
- The
subwoofer frequence control knob
controls the low-pass crossover
frequency for the dedicated
subwoofer output between 30-
300Hz at 12dB/octave.
6.
FFrreeqquueennccyy CCoonnttrroollss
- The frequency
control knobs control the gains for
their respective frequencies. The
center position is flat with a
maximum +18dB and -18dB
adjustment capability.
1
6
5
423