Filter
Top Products
Mixed-Mode Satellite and Subwoofer System
Set X-Over Mode to FULL.
Low
HIGH
FULL
NOTE Chart values based on 4 ohm speakers.
Fig.7 The amplifier can be configured for a mixed-mode operation. The table provides
component values to create a 6dB per octave crossover at specified frequencies. Use components
that have a 5% tolerance and capacitors rated at 100V. NOTE Choose the same frequency for
both LP and HP crossovers. Do not overlap frequencies, as this may damage the amplifier.
+
-
Fig.8 Electrical connections for the D3 400.2
D3 400.2
D3 400.2
7
8