Filter
Top Products
Getting Started Connections Setup Setting the Timer Other Functions Troubleshooting
ENGLISH
Specifications
1
Press [PURE DIRECT/TONE] and select the mode you
want to adjust.
BASS
TREBLE
Pure D
(PURE DIRECT)
BALANCE
2
Adjust the volume with [4/o, 6/p].
b Thereafter, to adjust another mode, press [PURE DIRECT/TONE].
b If no operation is performed for 3 seconds, the adjustment is
retained and the normal display reappears.
Adjusting the Tone
[Selectable modes]
Pure D
(PURE
DIRECT)
: This is the mode that recreates the original sound most
faithfully, providing extremely high quality sound.
[Selectable items]
on
off
BASS
: Adjusts the bass sound.
[Variable range]
–8dB
~
+8dB
TREBLE
: Adjusts the treble sound.
[Variable range]
–8dB
~
+8dB
BALANCE
: Adjusts the left/right volume balance.
[Variable range]
+L10
~
CENTER
~
+R10
Press [4/o] when you want to adjust the left channel,
and [6/p] when you want to adjust the right channel.
Settings made upon purchase:
• Pure D (PURE DIRECT) ·············off
• BASS ·······································0dB
• TREBLE ···································0dB
• BALANCE ························CENTER
When “Pure D” is set to “on”, digital output is switched off. What is
shown on the display also goes off. (When not playing or when no disc
is loaded, only part of the display is shown.)
NOTE
• When “Pure D” is set to “on”, you cannot set “BASS”, “TREBLE” or
“BALANCE”.
• When “Pure D” is set to “on”, you cannot use [DIMMER].
Switching the Brightness of the Display
Press [DIMMER].
100% 40%
OFF
b The display’s brightness switches each time the button is
pressed.
Turning the Sound Off Temporarily
(Muting)
Press [MUTE].
The “Mute on” is displayed.
To cancel, press [MUTE] again.
(The mute mode is also canceled when the <VOLUME> is turned or a
[VOLUME df] is pressed.)
Playback
Adjusting the Master Volume
Either turn <VOLUME> or press [VOLUME df].
The volume level is displayed.
[Variable range]
–90.0dB
~
0.0dB
b When lowering the volume from –90.0 dB, the display shows
“– –.– dB”.
Input Source Switching
Press SOURCE to select input source.
CD TUNER PHONO
LINE1 (iPod)LINE2
b
b The “iPod” indicator is displayed when a Control Dock for iPod is
connected. (“NO iPod” is displayed if no iPod is connected to the
Control Dock for iPod.)
Listening with Headphones
Plug the headphones (sold separately) into the <PHONES>.
b The sound from the speakers is automatically cut off.
NOTE
Be careful not to set the volume too high when using headphones.
Operations During Playback
1.RCD-CX1_ENG.indd 15 2008/05/30 11:20:22