Filter
Top Products
ENGLISH
ENGLISH ENGLISH
10
Operation
Preset stations (FM/AM)
1
Press the MENU button.
• The menu is displayed for 5 seconds.
2
While the menu is displayed, turn the
TUNING/PRESET knob to select “Memory”,
then press the
TUNING/PRESET knob.
• The preset mode is set and the preset channel
number flashes for about 15 seconds.
3
While the preset channel number is flashing,
turn the
TUNING/PRESET knob and select the
desired preset channel number.
4
Press the TUNING/PRESET knob.
• The station currently tuned in is stored at the
selected preset channel number.
•To preset other stations, repeat steps 1 to 4.
•A total of 100 stations, FM and AM included, can be
preset.
Recalling preset stations (FM/AM)
4
Turn the TUNING/PRESET knob to select the
preset channel number.
1
Press the MENU button.
2
Turn the TUNING/PRESET knob to select
“Search Mode”, then press the
TUNING/PRESET knob.
3
Turn the TUNING/PRESET knob to select
“Preset”, then press the
TUNING/PRESET
knob.
• The preset search mode is set.
Preset channel number
“10” ...Channel number (1 ~ 10)
“A” .....Memory block (A ~ J)
• Before starting, tune in the station you want to preset.
2
Operations on the main unit
• If a station is preset at a channel number at which a different
station is already preset, the previously stored station is
cleared and the new station is preset in its place.
1
Press the MEMORY button.
• The preset mode is set.
2
Select the preset channel number.
•Press the SHIFT button to select the memory block
and use the CHANNEL buttons to select the channel
number.
• The preset channel number can also be selected
using the PRESET + and – buttons.
2
Operations on the remote control unit
3
Press the MEMORY button.
• The station is preset.
Select the preset channel number.
•Press the SHIFT button to select the memory block and
use the CHANNEL buttons to select the channel number.
• The preset channel number can also be selected using
the PRESET + and – buttons.
2
Operations on the remote control unit
2
Operations on the main unit