Filter
Top Products
ENGLISH
ENGLISH ENGLISH
8
Auto tuner presets
Operation
FM auto preset memory
2
Press the AUTO PRESET button.
POWER
BAND
Listening to FM/AM
Turning the power on
• If a station’s signal is too weak to tune in using auto preset
mode, preset it manually. ( page 10)
2 DEFAULT VALUE
2
Setting the power to the “on” mode
A1 ~ A10
87.5 / 89.1 / 98.1 / 108 / 90.1 / 90.1 / 90.1 /
90.1 / 90.1 / 90.1 MHz
B1 ~ B10
522 / 603 / 999 / 1404 / 1611 kHz,
90.1 / 90.1 / 90.1 / 90.1 / 90.1 MHz
C1 ~ C10 90.1 MHz
D1 ~ D10 90.1 MHz
E1 ~ E10 90.1 MHz
F1 ~ F10 90.1 MHz
G1 ~ G10 90.1 MHz
H1 ~ H10 90.1 MHz
I1 ~ I10 90.1 MHz
J1 ~ J10 90.1 MHz
Press the ON/STANDBY or POWER button.
• The display lights and the TU-1500AE becomes
operable.
2
Setting the power to the “standby” mode
When the power is in the “on” mode, press the
ON/STANDBY or POWER button.
• The power is set to the “standby” mode.
1
Press the BAND button to select “FM” band.
AUTO PRESET
ON/STANDBY
BAND
• The auto preset mode is set and the “AUTO
PRESET” indicator on the display flashes.
• FM broadcast stations are automatically searched for
and stored in order at the preset channels, starting
from “A1”.
• When the first FM broadcast station is found, that
station is stored in the preset memory at channel
“A1”.
Subsequent stations are automatically stored in
order at preset channels A1 to A10, B1 to B10, C1 to
C10, D1 to D10, E1 to E10, F1 to F10, G1 to G10, H1
to H10, I1 to I10 and J1 to J10 for a maximum of 100
stations.
• Channel “A1” is tuned in after the auto preset
memory operation is completed.