Denon PMD330 CD Player User Manual


 
14
ENGLISH
FRANCAIS
DEUTSCH
NEDERLANDS
ESPANOLITALINO PORTUGUES
SVENSKA
DANSK
DANSK
SVENSKAPORTUGUES ITALINOESPANOL NEDERLANDSDEUTSCH
FRANCAIS
ENGLISH
Playback Mode Chart
Functions, LCD Display, and Initial Values
Tips:
- This CD player is equipped with a “power-on auto repeat play
back” function.
The “power-on auto repeat playback” function begins playing
automatically if the CD player is turned on while there is a CD
in the disc tray.
In order to use the “power-on auto repeat playback” function,
you must make the following two settings beforehand:
1) Select “Single:Off” for play back mode function No.1.
2) Select “Repeat:All” for playback mode function No.4.
3) Select “Auto Cue:Off” for preset function No.1.
4) Select “Start:Play” for preset function No.13.
- The playback mode that is currently set is stored in memory,
and becomes the initial setting the next time that the power is
turned on.
If there is a disc in the tray, playback begins automatically in
“all track repeat” mode when the power is turned on.
Note:
If you have set “Yes” for “Reset?” in the preset menu, the
initial value for the playback mode is also restored.
Checking the Playback Mode
Procedure
Pressing the MODE button @2 causes the various playback
modes to be displayed on the screen.
Tip:
The following playback modes can be selected in combination:
single-track playback (“Single”), program playback (“Pro-
gram”), random playback (“Random”) and repeat playback
(“Repeat”).
Setting the Playback Mode
Procedure
1. Press the MODE button @2.
The
/ENTER button !7 lights.
One of the playback modes and the current setting appear
on the display E.
Tip:
For the items that can be set in playback mode, refer to the
Playback Mode Chart.
2. Press the MODE button @2 in order to scroll through the
playback modes.
Tip:
It is also possible to scroll through the items in the playback
mode menu by pressing the INDEX+ button @4 or the INDEX–
button @1.
3. Use the
button !2 or the button !4 to change the setting
of the displayed mode.
At this point, the /ENTER button !7 changes from being
steadily lit to flashing .
4. Press the
/ENTER button !7 to confirm the change.
At this point, the
/ENTER button !7 changes from being
flashing to steadily lit.
Tip:
Press the CUE/CLEAR button !5 to cancel a change before it is
confirmed.
5. Press the
/EXIT button !3 to exit the setting menu and
return to the stopped state.
Playback Modes
ENTERENTER
ENTER ENTER
On
On
1
2
3
4
Function
Playback mode
(LCD display)
Setting items
Initial value(bold)
Selects the operation
when playback
of a single track ends.
Selects whether to use
program playback or not.
Selects whether to use
random playback or not.
Selects whether to
repeat playback or not.
NO.
Single:
Single
track repeat
All
track repeat
Off
On
Cue
Stop
Off
Off
Off
1All
Program:
Random:
Repeat: