Filter
Top Products
24
(3) Detailed Description of Preset Functions
(* = initial setting)
1) "Preset Type (*1" (Three different sets (types) of presettings can be made and used for different purposes.)
* Preset Type1 : Set to preset type 1.
Preset Type2 : Set to preset type 2.
Preset Type3 : Set to preset type 3.
2) "CueDet. (-**) dB"
CueDet. (-**) dB : Set the audio detection level for cueing. (-72/-66/*-60/-54/-48/-42/-36)
3) "Sleep ON (OFF)"
* Sleep ON : Automatically turn the servo functions off if no button is operated for 30 minutes in the pause, standby or manual
search mode.
Sleep OFF : Do not automatically turn the servo functions off.
4) "FS OFF (***kHz)" (This setting can only be made when an optional FS converter is mounted.)
* FS OFF : Do not use the FS converter.
FS (***kHz) : Select the digital output FS. (32kHz/44.1 kHz/48kHz)
5) "Programl OFF (ON)"
Programl OFF (ON) : Store the contents of program 1 when on. (Initial setting-OFF)
6) "Progam2 OFF (ON)"
Program2 OFF (ON) : Store the contents of program 2 when on. (Initial setting - OFF)
7) "Program3 OFF (ON)"
Program3 OFF (ON) : Store the contents of program 3 when on. (Initial setting - OFF)
8) "D.Out Pro (Cons)"
*D.Out Pro : Output digital signals in AES/EBU format.
D.Out Cons : Output digital signals in consumer format.
9) "Subcode ON (OFF)" (When "D.Out Cons" is set above, subcodes can be output with the digital output signals.)
Subcode ON : Output subcodes with the digital output signals. (consumer SPDIF format)
*Subcode OFF : Do not output subcodes with the digital output signals. (consumer IEC 958 Type II format)
NOTE: 0 sec. start is not possible when the above is set to "Subcode ON".
10) "End Mon. (**)sec"
End Mon. (**)sec : Set the end monitor time. (5/*10/15/20/25/30/35)
End Mon. OFF : Do not use the end monitor function.
11) "E.O.M. (**)sec" (Output EOM tally signal to remote pint (24))
E.O.M. (**)sec : Set the EOM time. (0/5/*10/15/20/25/30)
E.O.M. OFF . Do not use the EOM function.
12) "Next Stb.Off (ON)"
*Next Stb.OFF : Return to the play start position and standby when the STANDBY/CUE button is pressed during playback.
Next Stb.ON : Standby at the beginning of the next track when the STANDBY/CUE button is pressed during playback.
13) "FadeIn OFF ('s)"
Fadeln OFF (***s) : Set the fade in time. (*OFF/10m/50m/0.1/0.5/1/2)
14) "FadeOut OFF (***s)"
FadeOut OFF (***s) : Set the fade out time. (*OFF/10m/50m/0.1/0.5/1/2)
15) "Normal (+/-***%) Speed"
*Normal Speed : Play at normal speed.
(+/-***%) Speed : Play at variable speed. t(0.2/0.4/0.6/0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.4/2.6/2.8/3.0)