Denon DRA-395 Stereo System User Manual


 
26
ENGLISH
Audio section
(Power amplifier)
Rated output: 80 W + 80 W (8 /ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
Output terminals: A or B 14 to 16 /ohms
A+B 18 to 16 /ohms
(Analog)
LINE input PRE OUT
Input sensitivity/input impedance: 200 mV / 47 k/kohms
Frequency response: 10 Hz ~ 50 kHz: ±1.5 dB
S/N ratio: 100 dB (IHF-A weighted)
Total harmonic distortion: 0.009 % (-3 dB at rated output,8 /ohms) (1 kHz)
Rated output: 1.2 V
PHONO input REC OUT
Input sensitivity/input impedance: 2.5 mV/47 k/kohms
RIAA deviation: ±0.5 dB (20 Hz ~ 20kHz)
S/N ratio: 74 dB (IHF-A weighted, with 5 mV input)
Total harmonic distortion: 0.03 % (1 kHz, 3V)
Rated output/Maximum output: 150 mV / 7 V
Video section
(standard video jacks)
Input/output level and impedance: 1 V p-p, 75 /ohms
Frequency response: 5 Hz ~ 10 MHz +1, -3 dB
Tuner section
[FM] (note:
µ
V at 75
/ohms, 0 dBf = 1 x 10
-15
W) [AM]
Receiving range: 87.5 MHz ~ 107.9 MHz 520 kHz ~ 1710 kHz
Usable sensitivity: 1.4 µV (14.2 dBf) 18 µV
50 dB quieting sensitivity: MONO 2.8
µ
V (20.2 dBf)
STEREO 23
µ
V (38.5 dBf)
S/N ratio: MONO 80 dB (IHF-A weighted)
STEREO 75 dB (IHF-A weighted)
Total harmonic distortion: MONO 0.15 % (1kHz)
STEREO 0.3 % (1kHz)
General
Power supply: AC 120 V, 60 Hz
Power consumption: 3.39 A
Maximum external dimensions: 434 (W) x 147 (H) x 417 (D) mm (17-1/16 x 5-25/32 x 16-7/16)
Weight: 9.7 kg (21 lbs 6 oz)
Remote control unit (RC-894)
Batteries: R03/AAA Type (two batteries)
External dimensions: 64 (W) x 206 (H) x 19 (D) mm (2-13/64 x 8-9/32 x 3/4)
Weight: 140 g (Approx. 4.9 oz) (including batteries)
* For purposes of improvement, specifications and design are subject to change without notice.
13
SPECIFICATIONS