Filter
Top Products
15
ENGLISH
Adjusting the CHANNEL LEVEL, TONE, and LOUDNESS control
B
6 5 1 32, 4
6
Press the LOUDNESS button.
Press the loudness button ON when
listening to music at a low volume.
The low notes and high notes will be
corrected to produce a natural sound.
LOUDNESS button can be used when
the TONE DEFEAT ON mode.
LOUDNESS
Adjust the channel levels.
1
Select the channel whose level you want to adjust.
CH VOL
(Main unit)
CH VOL
(Remote control unit)
The channel switches as shown below each time the button is
pressed.
L R SW
2
Adjust the level of the selected channel.
SELECT
UP
DOWN
(Main unit)
•
ª
(Remote control unit)
The volume can be adjusted between -12 dB and +12 dB in
units of 1 dB.
Adjusting the sound quality (tone)
3
Select the BASS or TREBLE whose you
want to adjust.
TREBLE
BASS
(Main unit)
4
With the name of the volume to be
adjusted selected, press the SELECT
button to adjust the level.
SELECT
UP
DOWN
• To increase the bass or treble: Press
the SELECT UP button. (The bass or
treble sound can be increased to up to
+12 dB in steps of 2 dB.)
• To decrease the bass or treble: Press the SELECT DOWN
button. (The bass or treble sound can be decreased to up to
–12 dB in steps of 2 dB.)
5
If you do not want the bass and treble to be adjusted, turn on
the tone defeat mode.
TONE
DEFEAT
The signals do not pass through the
bass and treble adjustment circuits,
providing higher quality sound.
MAIN
VOLUME VOLUME
DVD / VDP
VCRV. AUXPHONOTUNER
CD
CDR / TAPE
PHONO
DVD / VDP
CD VCR
PRESET
SPEAKER
AB
CDR / TAPE
V. AUXTUNER
DIMMER CH VOL
STATUS
VIDEO SELECT
SHIFT
MUTING
MASTER VOL
PRESET
REMOTE CONTROL UNIT RC-894
B
1076
ZONE 2 ZONE 3
TAPE
MULTI ROOM
•
ª
•
ª
•
ª
•
ª
•
ª
•
ª
OFF
ON
OFF
ON
OFF
2
1
(Main unit)
(Main unit)
(Main unit)