Filter
Top Products
ENGLISH
Getting Started Operations Troubleshooting Specifications
$0"9*"-
*/
015*$"-
*/
3
-
"6%*0*/
R
L
R
L
Analog Connections
Stereo receiver
Digital Connections
• Connect either the “COAXIAL” or the “OPTICAL” digital output
terminal.
• There is a protective cap covering the optical digital output terminal.
After removing the protective cap, insert the plug firmly until it
locks.
CD recorder,
MD recorder, etc.
No digital signals are output for Super Audio CDs.
n When connecting the optical digital output
connector with an optical transmission cable
(commercially available)
Protective cap Match the
shapes
Remove the protective cap, match the shapes, then insert firmly all
the way in.
Store the protective cap in a safe place so as not to lose it, and use it
when not using the terminal.
Connecting the Power Cord
(AC 120 V, 60 Hz)
Power cord
(included)
NOTE
• Insert the plugs securely. Incomplete connections will result in the
generation of noise.
• Do not unplug the power cord while the set is operating.
AC outlet (wall)
Connections
1.DCDCX3E3_ENG.indd 10 2008/02/14 11:38:56