Denon AVR-785 Stereo Receiver User Manual


 
IN
VIDEO
RINOUT
AUDIO
VIDEO
OUT IN
LRL
R
L
R
L
R OUT
VIDEO
OUT
L
AUDIO
L
R
R OUT
VIDEO
OUT
L
AUDIO
R
L
R
L
R
L
R
L
B
B
L
R
Connecting video components
•To connect the video signal, connect using a 75 /ohms video signal cable cord. Using an improper cable can result in a drop in video quality.
When making connections, also refer to the operating instructions of the other components.
The AVR-1905/785 is equipped with a function for up-converting video signals.
The signal connected to the video signal terminal is output to the S-Video and component video monitor out terminals.
The REC OUT terminals have no conversion function, so when recording only connect the video terminals.
TV or DBS tuner
Connecting a TV/DBS tuner
TV or DBS
Connect the TV’s or DBS tuner’s video output jack (VIDEO OUTPUT) to the (yellow) TV or DBS
IN jack using a 75 /ohms video coaxial pin plug cord.
Connect the TV’s or DBS tuner’s audio output jacks (AUDIO OUTPUT) to the TV or DBS IN jacks
using pin plug cords.
AUDIO
VIDEO
DVD player or video disc player
(VDP), etc.
Connecting a DVD player or a video disc player (VDP)
DVD
• Connect the video disc player’s video output jack (VIDEO OUTPUT) to the (yellow)
DVD IN jack using a 75 /ohms video coaxial pin plug cord.
Connect the video disc player’s analog audio output jacks (ANALOG AUDIO OUTPUT) to
the DVD IN jacks using pin plug cords.
VDP can be connected to the VDP jacks in the same way.
AUDIO
VIDEO
Monitor TV
MONITOR OUT
Connect the TV’s video input jack (VIDEO
INPUT) to the MONITOR OUT
jack using a 75 /ohms video coaxial pin
plug cord.
VIDEO
Note on connecting the digital input jacks
Only audio signals are inputs to the digital input jacks.
For details. (See page 7)
Video deck
Connecting a video decks
There are two sets of video deck (VCR) jacks, so two video decks can be connected for
simultaneous recording or video copying.
Video input/output connections:
Connect the video deck’s video output jack (VIDEO OUT) to the (yellow) VCR IN jack,
and the video deck’s video input jack (VIDEO IN) to the (yellow) VCR OUT jack using
75 /ohms video coaxial pin plug cords.
Connecting the audio output jacks
Connect the video deck’s audio output jacks (AUDIO OUT) to the VCR IN jacks, and
the video deck’s audio input jacks (AUDIO IN) to the VCR OUT jacks using pin plug
cords.
AUDIO
AUDIO
VIDEO
VIDEO
Connecting a Monitor TV
8
ENGLISH