Filter
Top Products
Before setting up the system
4
Press the SYSTEM SETUP button to enter the setting.
5
Press the ENTER or (down) button to switch to the Speaker Configuration set up.
*SYSTEM SET UP
NOTE:
Press the SYSTEM SETUP button again to finish system set up. System set up can be finished at any time. The changes to the settings made
up to that point are entered.
NOTE: Please make sure the “AUDIO” position of the slide switch
on the remote control unit.
3
ON / STANDBY
Turn on the power.
Press the Power ON/STANDBY switch (button).
(Main unit) (Remote control unit)
2
ON OFF
Press the Power switch (button) .
(Main unit)
• ¢ ON
The power turns on and indicator is light.
Set the power switch to this position to turn the power on and off from the included remote control unit.
• £ OFF
The power turns off and indicator is off.
In this position, the power cannot be turned on and off from the remote control unit.
1
Refer to “CONNECTIONS” (pages 7 to 15) and check that all connections are correct.
21
ENGLISH