37
3-1
Setting the Digital In Assignment
• This setting assigns the digital input jacks of the AVR-2805/985 for the different input sources.
1
2
3
4
At the Input Setup Menu select “Digital In Assign”.
Display the Digital Inputs screen.
Select the digital input jack to be assigned to the input source.
q Select the input source
Enter the setting.
The Input Setup Menu reappears.
(Remote control unit)
(Remote control unit)
Digital In
*Input Setup
CD : COAX1
*Digital In
(Remote control unit)
(Remote control unit)
(Remote control unit)
NOTES:
• The OPTICAL 3, 4 jacks on the AVR-2805/985’s rear panel are equipped with an optical digital output jack for recording digital signals on a CD
recorder, MD recorder or other digital recorder. Use this for digital recording between a digital audio source (stereo - 2 channel) and a digital
audio recorder.
• Do not connect the output of the component connected to the OPTICAL 3, 4 OUT jack on the AVR-2805/985’s rear panel to any jack other
than the OPTICAL 3, 4 IN jack.
•“PHONO” and “TUNER” cannot be selected on the Digital In Assignment.
w Select the digital input jack
Select “OFF” for input sources for which no digital input jacks are used.
If “Yes ” is selected for “Default”, the settings are automatically reset to the default
values.