Denon AVR-887 Stereo Receiver User Manual


 
ENGLISH
ENGLISH
74
Specifications
¢ Audio section
Power amplifier
Rated output: Front (A, B):
100 W + 100 W (8 /ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
135 W + 135 W (6 /ohms, 1 kHz with 0.7 % T.H.D.)
Center:
100 W (8 /ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
135 W (6 /ohms, 1 kHz with 0.7 % T.H.D.)
Surround:
100 W + 100 W (8 /ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
135 W + 135 W (6 /ohms, 1 kHz with 0.7 % T.H.D.)
Surround Back:
100 W + 100 W (8 /ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
135 W + 135 W (6 /ohms, 1 kHz with 0.7 % T.H.D.)
Dynamic power: 120 W x 2 ch (8 /ohms)
170 W x 2 ch (4 /ohms)
Output terminals: Front: A or B 06 ~ 16 /ohms
A + B 12 ~ 16 /ohms
Center, Surround, Surround. Back: 06 ~ 16 /ohms
Analog
Input sensitivity / input impedance: 200 mV / 47 k/kohms
Frequency response: 10 Hz ~ 100 kHz: +1, –3 dB (DIRECT mode)
S/N: 100 dB (IHF-A weighted) (DIRECT mode)
Distortion: 0.008 % (20 Hz ~ 20 kHz) (DIRECT mode)
Rated output: 1.2 V
Phono equalizer (PHONO input — REC OUT)
Input sensitivity: 2.5 mV
RIAA deviation: ±1 dB (20 Hz to 20 kHz)
S/N: 74 dB (A weighting, with 5 mV input)
Rated output / Maximum output: 150 mV / 7 V
Distortion factor: 0.03 % (1 kHz, 3 V)
¢ Video section
Standard video terminals
Input / output level and impedance: 1 Vp-p, 75 /ohms
Frequency response: 5 Hz ~ 10 MHz — +0, –3 dB
S-Video terminals
Input / output level and impedance: Y (brightness) signal — 1 Vp-p, 75 /ohms
C (color) signal — 0.286 Vp-p, 75 /ohms
Frequency response: 5 Hz ~ 10 MHz — +0, –3 dB
Color component video terminal
Input / output level and impedance: Y (brightness) signal — 1 Vp-p, 75 /ohms
P
B/CB signal — 0.7 Vp-p, 75 /ohms
P
R/CR signal — 0.7 Vp-p, 75 /ohms
Frequency response: 5 Hz ~ 100 MHz — +0, –3 dB
¢ Tuner section [FM] [AM]
(note: µV at 75 /ohms, 0 dBf = 1 x 10
–15
W)
Receiving Range: 87.5 MHz ~ 107.9 MHz 520 kHz ~ 1710 kHz
Usable Sensitivity: 1.0 µV (11.2 dBf) 18 µV
50 dB Quieting Sensitivity: MONO 1.6 µV (15.3 dBf)
STEREO 23 µV (38.5 dBf)
S/N (IHF-A): MONO 77 dB (IHF-A weighted)
STEREO 72 dB (IHF-A weighted)
Total Harmonic Distortion (at 1 kHz): MONO 0.15 %
STEREO 0.3 %
¢ General
Power supply: AC 120 V, 60 Hz
Power consumption: 5.5 A
1 W Max (Standby)
Maximum external dimensions: 434 (W) x 171 (H) x 417 (D) mm (17-3/32” x 6-47/64” x 16-27/64”)
Mass: 13 kg (28 lbs 11 oz)
¢ Remote control unit (RC-1043)
Batteries: R6P/AA Type (Two batteries)
External dimensions: 52 (W) x 243 (H) x 21 (D) mm (2-3/64” x 9-9/16” x 53/64”)
Mass: 175 g (Approx. 6.2 oz) (included batteries)
* For purposes of improvement, specifications and design are subject to change without notice.