Filter
Top Products
Getting Started Connections Playback Remote Control Multi-Zone Information Troubleshooting
ENGLISH
Setup
Operations (vpage 19)
h Remote ID Setup
Set remote control ID.
[Display]
1.Sp 2.In 3.Op
E
Option Setup
E
6 Remote ID 1
[Selectable items]
1
2
3
4
NOTE
When using the AVR-588 with only the included remote control unit
(RC-1075), there is no need to make settings.
When using a separately sold remote control unit (RC-7000CI, etc.),
this function can be used. Match the ID setting of the remote control
unit and the receiver.
DTS NEO:6
: The signals are decoded in DTS NEO:6 for
playback.
Cinema
: This mode is suited for movie sources.
Music
: This mode is suited for music sources.
neural
: It is possible to play analog input signals and
PCM (2-channel, 48 kHz or less) in the surround
mode.
This is the optimum mode for playing sources
recorded in XM HD Surround (vpage 34).
Surround Playback of 2-channel Sources
DOLBY PLgx
or DOLBY PLg
: The signals are decoded in DOLBY PLgx or
DOLBY PLg for playback.
Cinema
: This mode is suited for movie sources.
Music
: This mode is suited for music sources.
Game
: This mode is suited for games.
Pro Logic
: This is the Pro Logic playback mode. This can
be selected when playing with a DOLBY PLg
decoder. When this mode is selected, “DOLBY
PL” is displayed.
Standard Playback
This is the standard mode for enjoying surround sound according
to the program source.
Surround Modes
To select these surround modes using the SELECT/ENTER knob on
the main unit or press the STD button on the remote control unit. The
mode switches each time the button is pressed.
n When using a surround back speaker
[Selectable items]
DOLBY PLgx
DTS NEO:6
neural
n When not using a surround back speaker
[Selectable items]
DOLBY PLg
DTS NEO:6
neural
Select the “Cinema”, “Music”, “Game” and “Pro Logic” modes at
“Surround Parameter” – “MODE” (vpage 27).