Denon AVR-486 Stereo Receiver User Manual


 
ENGLISH
35
Advanced Operation
ENGLISH
Advanced Operation
Multi zone music entertainment system
ZONE2 speaker out can be used when ZONE2 is selected at Power Amp Assignment. In this case, surround back speaker out
cannot be used for MAIN ZONE.
For instructions on installation and operation of separately sold devices, refer to the devices operating instructions.
2 When using the SURR.BACK/ZONE2 amplifier as the ZONE2
To use the ZONE2, turn on the ZONE2 button.
The output of the ZONE2 SPEAKER OUT terminals can be adjusted with the remote control units ZONE2 VOLUME button.
The input source selected with the INPUT SELECTOR knob is output for the ZONE2 speaker output.
[System configuration and connections example]
Using this units internal amplifier as the ZONE2.
This unit
DVD player
Input
Monitor
MAIN ZONE 5.1-channel systems
ZONE2 SPEAKER OUT
SYSTEM REMOTE
CONTROL UNIT RC-1001
C
FL FR
SL
SW
SR
B
ZONE2
: SPEAKER cable
Refer to Connections ( page 11).
Remote control unit operations during
multi-source playback (selecting the source)
1
Set the MODE 1 switch to the “AUDIO”.
2
Set the MODE 2 switch to the “ZONE2”.
3
Press the ZONE2 ON button.
To cancel the ZONE2 mode:
Press the ZONE2 OFF button.
MODE 2
MODE 1
ZONE2 ON
ZONE2 OFF
VOLUME
CHANNEL
4
The output level of the ZONE2 SPEAKER OUT
terminals can be controlled pressing the
VOLUME button on the remote control unit.
Default setting (ZONE2 VOLUME LEVEL):
dB (MINIMUM)
This is only possible when the main unit in the ZONE2 mode
( page 16).