Denon AVR-485S Stereo Receiver User Manual


 
45
5
Set the surround parameter according to the source.
NOTE:
Please make sure the “AUDIO” position of the slide switch on the remote control unit.
(Remote control unit)
(Main unit)
The parameter switches as shown below each time the button is pressed.
CINEMA EQ
TONE DEFEAT
SURROUND BACK
DEFAULT
D.COMP.
LFE
If you do want the bass and trable to be adjusted, turn off the tone defeat mode.
6
Set the various surround parameters.
• CINEMA EQ setting
ON OFF
or
or
CINEMA EQ OFF
• D. COMP. setting
OFF
LOW MID HIGH
oror
D.COMP. OFF
• DEFAULT setting
YES NO
or
or
DEFAULT Y/N
Select “Yes” to reset to the factory defaults.
7
Press the ENTER button to finish surround parameter mode.
(Remote control unit)
• LFE setting
-10dB
-5dB 0dB
oror
LFE 0dB
• TONE DEFEAT setting
ON OFF
or
or
TONE DEF. ON
NOTE:
When making parameter settings, the display will return to the regular condition several seconds after the last button was pressed and
the setting will be completed.
NOTE:
This parameter is displayed during DOLBY DIGITAL playback.
• SURROUND BACK SPEAKER setting
MTRX ON
NON MTRX OFF
oror
SB : MTRX ON
NOTE:
This parameter is displayed during DOLBY DIGITAL playback.
ENGLISH