Denon AVR-485S Stereo Receiver User Manual


 
22
6
Use the (left) and (right) buttons to set the distance from the surround back speakers to the listening
position.
11 S.BACK 10ft
The number changes in units of 1 foot each time one of the buttons is pressed. Select the value closest
to the measured distance.
Press the ENTER or (down) button to switch to the subwoofer setting.
5
Use the (left) and (right) buttons to set the distance from the surround R speakers to the listening
position.
10 SURR.R 10ft
The number changes in units of 1 foot each time one of the buttons is pressed. Select the value closest
to the measured distance.
Press the ENTER or (down) button to switch to the surround back speaker setting.
7
Use the (left) and (right) buttons to set the distance from the subwoofer to the listening position.
12 SW 12ft
The number changes in units of 1 foot each time one of the buttons is pressed. Select the value closest
to the measured distance.
Press the ENTER or (down) button to enter the setting and switch to the Subwoofer mode setting.
4
Use the (left) and (right) buttons to set the distance from the surround L speakers to the listening
position.
9 SURR.L 10ft
The number changes in units of 1 foot each time one of the buttons is pressed. Select the value closest
to the measured distance.
Press the ENTER or (down) button to switch to the surround R speaker setting.
ENGLISH