Denon AVR-682 Stereo Receiver User Manual


 
47
ENGLISH
20
SPECIFICATIONS
2 Audio section
Power amplifier
Rated output: Front: 70 W + 70 W (8 /ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)
100 W + 100 W (6 /ohms, 1 kHz with 0.7% T.H.D.)
Center: 70 W (8 /ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)
100 W (6 /ohms, 1 kHz with 0.7% T.H.D.)
Surround: 70 W + 70 W (8 /ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)
100 W + 100 W (6 /ohms, 1 kHz with 0.7% T.H.D.)
Output terminals: Front: A or B 16 to 16 /ohms
A + B 12 to 16 /ohms
Center/Surround: 16 to 16 /ohms
Analog
LINE input - SPEAKER OUT
Input sensitivity / input impedance: 200 mV / 47 k/kohms
Frequency response: 10 Hz ~ 100 kHz: +1, 3 dB (TONE DEFEAT ON)
S/N ratio: 98 dB (IHF-A weighted) (TONE DEFEAT ON)
2 Video section
Standard video jacks
Input / output level and impedance: 1 Vp-p, 75 /ohms
Frequency response: 5 Hz ~ 10 MHz +1, 3 dB
S-video jacks
Input / output level and impedance: Y (brightness) signal 1 Vp-p, 75 /ohms
C (color) signal 0.286 Vp-p, 75 /ohms
Frequency response: 5 Hz ~ 10 MHz +1, 3 dB
2 Tuner section
[FM] (note: µV at 75 /ohms, 0 dBf = 1 x 10
15
W) [AM]
Receiving range: 87.50 MHz ~ 107.90 MHz 520 kHz ~ 1710 kHz
Usable sensitivity: 1.0 µV (11.2 dBf) 18 µV
50 dB quieting sensitivity: MONO 1.6 µV (15.3 dBf)
STEREO 23 µV (38.5 dBf)
S/N ratio: MONO 80 dB (IHF-A weighted)
STEREO 75 dB (IHF-A weighted)
Total harmonic distortion: MONO 0.15% (1kHz)
STEREO 0.3% (1kHz)
2 General
Power supply: AC 120 V, 60 Hz
Power consumption: 3.7 A
Maximum external dimensions: 434 (W) x 147 (H) x 417 (D) mm (17-3/32 x 5-25/32 x 16-7/16)
Weight: 9.8 kg (21 lbs 9.7 oz)
2 Remote control unit (RC-896)
Batteries: R6P/AA Type (two batteries)
External dimensions: 54 (W) x 172.5 (H) x 29 (D) mm (2-1/8 x 6-25/32 x 1-9/64)
Weight: 120 g (Approx. 4.2 oz) (including batteries)
* For purposes of improvement, specifications and design are subject to change without notice.