Filter
Top Products
4 Dell PowerEdge 2450 Systems - Two-Post Rack Installation
DELL CONFIDENTIAL - Preliminary 9/27/01
(Rev. 11/3/98) FILE LOCATION: C:\Dell\docs\2450\2post\81HFFts0.fm
Figure 3. Installing the Support Tray in the Rack
Installing the System in the Rack
CAUTION: Due to the size and weight of the computer system, never
attempt to install the computer system by yourself.
1. If your system has an optional plastic bezel, remove it (see the Installation and
Troubleshooting Guide for instructions).
2. Lift the system into position on the support tray.
3. Slide the system completely into position and secure it to the rack using the cap-
tive fasteners at the lower edge of the front panel (see Figure 4).
12-24 x 0.5 inch
screws (4)