Filter
Top Products
2 Dell PowerEdge 2450 Systems - Two-Post Rack Installation
DELL CONFIDENTIAL - Preliminary 9/27/01
(Rev. 11/3/98) FILE LOCATION: C:\Dell\docs\2450\2post\81HFFts0.fm
Figure 1. Rack Kit Contents
Recommended Tools
You need the following tools and equipment to install the system in a two-post open-
frame relay rack:
• #2 Phillips screwdriver
• Masking tape and/or felt-tip marker pen, for use in marking the mounting holes to
be used
Marking the Rack
1. Determine where you want to place the bottom of the 2-U support tray.
2. Mark the top and bottom holes on the rack.
Each 1-U (1.75-inch) vertical space has three holes, with center-to-center spacing
between holes (beginning at the top of a 1-U space) of 0.625, 0.625, and 0.5
inches (see Figure 2).
tray assembly
12-24 x 0.5 inch pan-head screw