Filter
Top Products
1-10 Dell PowerEdge 2400 Systems Rack Installation Guide
5. Align the mounting tab on the front of the slide-assembly mounting bracket with
the notches in the rack (see Figure 1-8).
6. Push until the mounting tabs are secure in the notches on the rack and the push-
button clicks out.
7. Push back on the slide assembly until the mounting tabs lock into the back side of
the rack.
8. Repeat steps 5 through 7 for the other side of the rack.
Ensure that the rails are mounted at the same position on each side of the rack.
Figure 1-8. Installing the Slide Assemblies
slide-assembly
mounting-bracket
flange
push button
slide
assemblies (2)
mounting
tabs