Filter
Top Products
19
IR LEARN
Volume Up
Store
Volume Down
Cancel
Mute
Clear All
HDMI 1
HDMI 2
HDMI 3
Input 4
Power
4. SUB CONNECTION: The SoloCinema XTR subwoofer and system are paired at the
factory to communicate automatically. Normally, the user needs to do nothing with this
screen. In rare instances such as if the original sub or bar are replaced, you must pair
the subwoofer with the bar.
a) Turn off the subwoofer and wait approximately 15 seconds
b) Select SUB CONNECTION and choose START PAIRING
c) Turn the subwoofer power ON
d) Wait until the green light appears on the subwoofer amp panel
e) Select “Enter” when done
SUB CONNECTION
START
PAIRING
5. SURROUND SOUND AUDIO (SSA) IMMERSION: The MOVIE and MUSIC surround
parameters are user-definable, allowing you customize the surround immersion intensity
you hear in music and movie modes. Your room configuration, main listening position,
and personal taste can all affect how much of the immersive sound experience you
want. The MOVIE AND MUSIC settings have a 21 position scale running from minus-10
to plus+10. They have been pre-set at the factory (MOVIE, plus-10, and MUSIC, 0), and
may need no adjustment. There is no “right” setting; experiment if you wish, adjust to
taste, and choose the setting that sounds best to you.
Please note that each time you want to use the MUSIC setting, you must choose it by
pushing the MUSIC button on the remote. The system defaults to the MOVIE setting
each time you select a new source.