Filter
Top Products
Service and warranty work on your Definitive loudspeakers will normally
be performed by your local Definitive Technology dealer. If, however, you
wish to return the speaker to us, please contact us first, describing the
problem and requesting authorization as well as the location of the nearest
factory service center. Please note that the address given in this booklet
is the address of our offices only
. Under no circumstances should loud-
speakers be shipped to our offices or returned without contacting us first
and obtaining return authorization.
Definitive Technology Offices
11433 Cronridge Drive, Suite K
Owings Mills, Maryland 21
117
Phone: 410-363-7148
Service
11
ProSub Specifications
ProSub 1000
Outer Dimensions: 12
"
W
x
17.9
"
W
x
14.4
"
H
Frequency Response: 18 Hz – 150 kHz
Driver Complement: One 10" woofer with polymer cone coupled to
one 10" infrasonic radiator
Amplifier: 300-Watts RMS
Speaker Level High-Pass Filter: 6 db/octave (80 hz)
Low-Level Low-Pass Filter: 24 db/octave continuously variable
(40 hz – 150 hz) plus unfiltered LFE direct-
coupled input
Fuse Size: 3.2 amp 250 volt slow-blow Littlefuse 313
type for the 110 volt version, and 2 amp 250
volt slow-blow BEL 5ET type for the 240
volt version.
ProSub 800
Outer Dimensions: 10.3
"
W
x
15.8
"
W
x
12.9
"
H
Frequency Response: 20 Hz – 150 kHz
Driver Complement: One 8" woofer with polymer cone coupled to
one 8" infrasonic radiator
Amplifier: 300-Watts RMS
Speaker Level High-Pass Filter: 6 db/octave (80 hz)
Low-Level Low-Pass Filter: 24 db/octave continuously variable
(40 hz – 150 hz) plus unfiltered LFE direct-
coupled input
Fuse Size: 3.2 amp 250 volt slow-blow Littlefuse 313
type for the 110 volt version, and 2 amp 250
volt slow-blow BEL 5ET type for the 240
volt version.
Specifications subject to change