Filter
Top Products
Definitive Technology
6
Figure 12a
Push gently
to set angle.
Figure 12b
Aiming the Tweeter
To aim the tweeter, first install the speaker in the desired location.
Gently push the tweeter in the direction you wish to point it
[figure 12a & 12b]. For rear/surround speakers, aim the tweeter
toward the nearest reflecting surface (an adjacent wall or
ceiling) for a more diffuse sound field (if you want a more
direct sound, aim the tweeters at your listening position).
Environmental EQ
If your listening room has smooth sheetrock walls, hardwood floors,
and non-cushioned furniture, the sound will be overly “bright” and
unnatural. Engaging the Environmental EQ feature [figure 13] (by
selecting the “–” setting) compensates for the effect of overly loud tre-
ble. If your room is has a lot of absorbing surfaces such as over-stuffed
furniture, heavy drapes and rugs such that the speakers sound “dull,”
engage the “+” setting to boost treble response. Leave the switch in the
center position in rooms with a balance of reflecting and absorbing sur-
faces (most rooms fall into this category).
Figure 13