Filter
Top Products
Even small changes in the listening room can affect the sound.
8
English
Phase setting
In most cases you will achieve the best results with "Phase" set to 180°.
However, this will depend on the front speakers you are using. Once again,
your ears must be the judge. Use the trial-and-error method for both set-
tings - and you may also want to try readjusting the volume and crossover
frequency. In all cases it is a good idea to listen to the system for several
days and readjust as required. The same setting will not always be ideal for
both surround sound and 2-channel stereo. So it is useful to make a note
of your preferred settings for each type.
The "Power" button is the main switch for the system. It is best to switch
off the system completely when it is not going to be in use for long
periods. When making any changes to connections, always shut down the
system completely.
Overloading
When playing at a loud volume, listen out for possible dissonance and dis-
tortion. AW 8/10 is protected against temporary overloading, but if you
often play at a loud volume, you should use a permanent lower setting for
the volume level on AW 8/10. If you position AW 8/10 in a corner, this will
increase the bass level.