Filter
Top Products
Talk to your authorised DALI dealer about cables - or visit www.dali.dk
6
English
In many cases one AW 8/10 in one of the listed setups will provide a good
solution, but the absolute perfect solution is two AW 8/10 in stereo setup.
This solution should be connected in exactly the same way, but you only
connect the left channel to one input terminal on the left AW 8/10 and
the right channel to one input terminal on the right AW 8/10. In other
respects, follow the instructions given above - simply with separate chan-
nels. If necessary, obtain advice from your dealer.
Once you have chosen the connection you wish to use, you must begin the
task of tuning the system. Following the procedure below will help you to
achieve good results. Use a piece of music that you know well, ideally with
rhythmic bass tone content such as bass drums, electric bass or similar.
Begin by setting "Volume" and "Crossover Frequency" to the central pos-
ition ("12 o'clock"). Set the "Phase" change-over switch to position 180°,
and set both "Auto Shut Off" and "Power" to the "ON" position.
Tuning AW 8/10