Filter
Top Products
CyberData Corporation 930095H Operations Guide
Mount the Speaker
26
Figure A-1. VoIP Speaker Assembly
2. Plug the Ethernet cable into the Speaker Assembly. Section 2.2.2, "Confirm that the Speaker is
Operational and Linked to the Network" explains how the Link and Status LEDs work.
3. At this point:
•For drop ceiling mounting, position the VoIP SPEAKER ASSEMBLY in the ceiling so that its
screw holes align with those you prepared.
•For drywall mounting, place the three PLASTIC RIBBED ANCHORS in the holes you
prepared, and position the VoIP SPEAKER ASSEMBLY over them, aligning the screw
holes in the assembly with the anchors.
080169B.dwg
VoIP SPEAKER ASSEMBLY
THUMBNUT(3X)
CEILING
VoIPSPEAKER
SCREW
MOUNTING
8-32x11/4" (3X)
ASSEMBLY
#8FENDER
120°
3
16
" HOLE (3x)
120°
WASHER(3X)
#8NYLON
#6SCREW (3x)
DRYWALL MOUNTINGKIT
TEMPLATE
PLASTICRIBBED ANCHOR(3x)
DRYWALL MOUNTINGKIT
7
1
4
" HOLE
3
8
"