CyberData VoIP Ceiling Speaker Speaker User Manual


 
CyberData Corporation 930095H Operations Guide
Installing the VoIP Ceiling Speaker
Upgrade the Firmware and Reboot the Speaker
22
2.5.1 Reboot the Speaker
To reboot a speaker, log in to the web page as instructed in Section 2.3.1, "Log in to the Configuration
Home Page".
1. Click Upgrade Firmware to open the Firmware Upgrade page (Figure 2-12).
Application Shows the current application filename for partition 1
and 2.
TFTP Server IP address Enter the TFTP Server IP address.
New Filename Use this field to enter the new file name for the kernel or
application firmware file that you are uploading.
Click on this button to automatically upload the selected
firmware and reboot the system.
Link to the Speaker Setup page.
Link to the Network Setup page.
Link to go to the SIP Setup page.
Link to the MGROUPS Setup page.
Link to the Home page.
Click on this button to reboot the system.
Table 2-9. Firmware Upgrade Parameters (continued)
Web Page Item Description