Curtis DVD5038 Home Theater System User Manual


 
Set TV standard
TV type
Audio
Subtitle
Disc menu
Parental
Default
NTSC
ENG
ENG
ENG
8 ADULT
RESET
PAL
MULTI
NTSC
.. Prefrence page ..
.. Video Quality Setup ..
Low
00
00
00
00
Sharpness
Brightness
Contrast
Hue
Saturation
Saturation
.. Video Quality Setup ..
Low
00
00
00
00
Sharpness
Brightness
Contrast
Hue
Saturation
Hue
.. Video Quality Setup ..
Low
00
00
00
00
Sharpness
Brightness
Contrast
Hue
Saturation
Contrast
.. Video Quality Setup ..
Low
00
00
00
00
Sharpness
Brightness
Contrast
Hue
Saturation
Brightness
5
This page contains valuable information regarding the handling, cleaning, and storage of discs
played in this unit.
Handling
Do not touch the playback side of the disc.
Do not attach paper or tape to discs.
Do not stick or write anything on the surface. Protect against fingerprints.
Always hold a disc by the center and edge portions.
Cleaning
Fingerprints and dirt on the disc may cause picture and/or sound deterioration. Wipe the disc from
the center outward with a soft cloth. Always keep the disc clean.
If you cannot wipe the dirt off, lightly use a slightly moistened soft cloth and finish with a dry cloth.
Do not use any type of solvent such as: Paint thinner, benzene, commercially available cleaners or
anti-static spray for vinyl LPs.
Storing
Do not store discs in places subject to direct sunlight or near heat sources.
Do not store discs in places subject to moisture and dust.
Store discs vertically in a case. Stacking or placing objects on discs outside of their case may
cause warping.
NOTE: CURTIS is not responsible for damage that may occur to any disc that is operated
in this unit or not handled, cleaned, or stored as suggested above.
USE OF DISCS
24
SYSTEM SETUP
Press right arrow button to enter adjustment
mode; press right and left buttons to make
adjustment.
Press enter button to return to setup menu.
CONTRAST SETUP
Follow the operation instructions stated in
DVD menu setup in combination with desired
option in the following figure.
Press right arrow button to enter adjustment
mode; press right and left buttons to make
adjustment.
Press enter button to return to setup menu.
SATURATION SETUP
Follow the operation instructions stated in
DVD menu setup in combination with desired
option in the following figure.
""
HUE SETUP
Follow the operation instructions stated in
DVD menu setup in combination with desired
option in the following figure.
""
Press right arrow button to enter adjustment
mode; press right and left buttons to make
adjustment.
Press enter button to return to setup menu.
PREFERENCE SETUP
During stop mode, press the SETUP button
to access the INITIAL SETUP menu, which
includes items of dubbing language, subtitle,
disc menu language, age control, default
values and main menu.
Preset values are essential to a DVD player.
The user may change these items as desired.
TV TYPE
Follow the operation instructions stated in
DVD menu setup in combination with the
desired option in the following figure.
""
Press right arrow button to enter adjustment
mode; press right and left buttons to make
adjustment.
Press enter button to return to setup menu.
This product supports output of various
system, including MULTI NTSC PAL.
1)If your TV set has only NTSC or PAL system,
the screen will blink and become colourless
when a wrong system is selected. In this case,
press the N/P button on the R.C to return to
normal, screen always remember to select the
correct system.
2)For more information of output format, refer
to the instructions or your TV set.