Filter
Top Products
Operation Manual
CE Series Power Amplifiers
page 18
4.3.3 Tamper-Resistant Hole Plugs
Your CE Series amplifier comes with a set of
tamper-resistant hole plugs, which allow you to
“protect” the level controls against unauthorized
adjustment. To use, simply pull off the control
knobs from the front of the amp, and slip the hole
plugs into place (see Figure 4.8). The plugs should
press easily into position with light force. Once in
place, the plugs will help to avoid most accidental
or intentional tampering (some situations may
require additional security measures).
To remove the hole plugs, simply pry the plug away
from the amplifier case using a small, flat-blade
screwdriver. To help to ensure adequate security, the
plugs have been designed to be more difficult to
remove than to place into position. If necessary,
additional hole plugs can be purchased separately
from Crown’s Parts Department (Part # 103234-1).
Store your knobs in a safe location should you need
to make level adjustments in the future.
4.3.4 Optional 0.775 V Input
Sensitivity Setting
The CE Series amplifier also provides an optional
0.775 V input sensitivity setting. If you determine
that your application requires this sensitivity set-
ting, please contact Crown Technical Support for
more information.
4 Advanced Features
and Options
Figure 4.6 Model CEAS1 Barrier Block
Output Connectors
Figure 4.7 Model CEAS2 5-way
Binding Post Output Connectors
Figure 4.8 Tamper-Resistant Hole Plugs
Installed in a CE Series Amplifier
4.3 Options
4.3.1 Accessories
CE HANDLES
Handles complement your amplifier’s appearance,
aid in transportation, and facilitate rack mounting
and removal. They are available from Crown’s Sales
Department; just ask for “CE Handles.”
CE-S1
Speakon to barrier output adapter. Compatible with
CE versions CE 1000 and CE 2000 amplifiers (ini-
tial release).
CE-S2
Speakon to 5-way binding post adapter.Compatible
with CE versions CE 1000 and CE 2000 amplifiers
(initial release).
4.3.2 Alternate Output Connectors
For added system flexibility, Crown offers optional
secondary output connectors that are compatible
with the current CE versions: CE 1000A , CE 2000A,
CE 1000B and CE 2000B amplifiers. (These model
numbers are printed only on the serial number
label.)
You have a choice of either the CEAS1 barrier block
(see Figure 4.6) or the CEAS2 5-way binding post
connectors (see Figure 4.7). Alternate output con-
nectors may come factory installed on new amplifier
orders. They can also be added to existing CE
Series amplifiers by an authorized Crown Service
Center. For more information, please contact Crown
Technical Support.