Crown CTS 3000 Stereo Amplifier User Manual


 
N E T W O R K E D P R O D U C T S
T
he Crown
®
PIP-USP4 is a 4th generation DSP-based PIP
TM
(Programmable
Input Processor) input module for CTs Series two channel amplifiers. The
USP4 connects to an Ethernet network allowing it to be remotely controlled
and monitored via System Architect. In addition, the USP4 allows the
transport of real-time digital audio via AES3, CobraNet
TM
or Ethernet AVB.
The USP4 is a HiQnet
TM
series component and connects to the audio control/
monitor network using 100Mb* Ethernet hardware (switches, Network
Interface Cards, and cables). The CobraNet or Ethernet AVB audio signal
is available over the same 100Mb* Ethernet network, providing a simple to
install, single plug solution for audio distribution, control, and monitoring.
The USP4’s OMNIDRIVEHD
TM
processor gives the user an enormous
amount of digital signal processing. LevelMAX
TM
limiters, proprietary
FIR and IIR filters, audio routing, faders, meters, polarity & mute,
compressors, delays, error reporting and load monitoring are all available.
Built in noise and sine-wave generator provide noise masking and test
capabilities. The enhanced AUX port allows users to interface with the
USP4 to provide additional external control and monitoring.
Offering crisp clear sound and the widest dynamic range possible, the PIP-
USP4 provides unprecedented power and flexibility in one compact—and
very affordable—module.
The USP4 can be installed in any CTs two channel amplifier. The USP4
is available in either CobraNet or Ethernet AVB versions for digital audio
transport; with both modules still having integrated AES3 transport.
The USP4 requires Harman Pro System Architect software. The System
Architect software is available at hiqnet.harmanpro.com.
Ultra smooth processing by onboard high-definition
BSS OMNIDRIVEHD DSP with 24-bit,192 kHz Cirrus
Logic SHARC A/D and D/A converters and true 96 kHz
processing
World-class FIR and IIR filters
LevelMAX™ peak, RMS and transducer thermal voltage
power limiters combine for a smooth and accurate
response, better sound, and higher usable SPL
100Mb Ethernet single-plug solution for CobraNetTM
audio, Ethernet AVB audio, and HiQnetTM control and
monitoring
Auto Standby for increased energy efficiency
Multiple Input Options Include: Analog, CobraNetTM or
Ethernet AVB, and AES3 Digital Audio
Digital Audio On/Off Ramp allows users to send pre
or post processed analog signal out of the module to
adjacent amplifiers
Amplifier output monitor using the Foldback control
through either CobraNetTM or Ethernet AVB network
SLM (Sweep Load Monitoring) with system-level
diagnostics
64 assignable filters with 9 different filter types including
all-pass filters
Over 4 seconds of delay available per channel
Input compressors for each channel
Full error reporting
Firmware upgrades via the network
50 user selectable presets
Reliable FLASH memory backup of all parameters
Ambient Leveler senses the ambient sound level of a
room via the connected loudspeakers
Over 2 seconds of delay available per channel.
Input compressors and output limiters for each channel.
Dual, uncorrelated noise generators for noise masking.
Sine-wave generator.
Load supervision.
Full error reporting.
Firmware upgrades via the network.
10 user selectable presets.
Reliable FLASH memory backup of all parameters.
FEATURES
PIP USP4