Filter
Top Products
Repeat Playback
Programmed Playback
Getting Started
Control Locators....................... 4,5
Unpacking................................. 6
Power Source........................... 6
Earphones Jack Operation
......... 6
Turntable Operation
Turntable Features.................. 7
Turntable Instructions.............. 7
Tone Arm Adjustment ............. 7
Accessory: Adapter for 45 rpm
.................................................. 8
Radio Operation
Radio Operation....................... 8
Antenna.................................... 8
CD Operation
Play a CD................................. 9
Skip Forward And Skip Reverse
.................................................. 9
Search Froward And Reverse
During Play ............................... 9
Repeat Play .............................. 10
Programmed Playback ............. 10
General
Troubleshooting Guide.......... 11
Warranty................................. 12
Thank you for purchasing the Crosley Band Master
3-in-1 Entertainer (CR86). Before operating this unit,
please read this manual thoroughly and retain it for
future reference.
Instructions in this manual describe the control
functions of the CR86.
10
About This Manual
Welcome Table of Contents
1 To repeat a single track, choose the track that
you want to repeat, then press the PLAY/PAUSE
BUTTON (8) to start the track. Press the REPEAT
BUTTON (11) once to repeat this track.
The REPEAT INDICATOR (10) will flash.
2 To repeat all tracks, press the PLAY/PAUSE
BUTTON (8) to start the CD. Press the REPEAT
BUTTON (11) twice to repeat all tracks. Once
the CD ends, it will star over again from the
beginning of the CD. The REPEAT INDICATOR
(10) will remain on.
3 To erase the repeat function, press the REPEAT
BUTTON (11) again until the REPEAT IDICATOR
(10) is off.
1 Press the PROGRAM BUTTON (13). " 01" will
shown on the display and the PROGRAM
INDICATOR (12) will flash.
2 Press the FORWARD SKIP BUTTON (16) or
the BACKWARD SKIP BUTTON (14) to select
a track.
3 Press the PROGRAM BUTTON (13) again to
store the selected track number.
4 Repeat steps 2 and 3 above to program other
tracks.
5 Press the PLAY/PAUSE BUTTON (8) to start
programmed playback and the PROGRAM
INDICATOR (12) will be on.
6 To erase the programmed sequence, press the
STOP BUTTON (9) twice or until the PROGRAM
INDICATOR (12) is off. Programmed tracks will
also erase when the CD DRAWER (13) is
opened.
NOTE: Maximum of 20 tracks can be programmed
to play in any order.
CD Operation