Filter
Top Products
Repeat Playback
Programmed Playback
Getting Started
Control Locators....................... 4,5
Unpacking................................. 6
Power Source........................... 6
Basic Operation
Turntable Operation.................. 7
Accessory: Adapter for 45 rpm
.................................................. 7
Cassette Operation.................. 8
Radio Operation....................... 8
CD Operation
Playing A CD............................ 9,10
Programmed Playback............. 10
Connecting Optional Equipment
External Speakers.................... 11
Auxiliary Outputs...................... 11
Auxiliary Inputs......................... 11
General
Troubleshooting Guide.......... 12
Warranty.............................. 13
10
About This Manual
Thank you for purchasing the Crosley Centurion
(CR83). Before operating this unit, please read this
manual thoroughly and retain it for future reference.
Instructions in this manual describe the control
functions of the CR83.
Welcome Table of Contents
1 To repeat a single track, choose the track that
you want to repeat, then press the PLAY/PAUSE
BUTTON (14) to start the track. Press the
REPEAT BUTTON (11) once to repeat this track.
The REPEAT INDICATOR (10) will flash.
2 To repeat all tracks, press the PLAY/PAUSE
BUTTON (14) to start the CD. Press the REPEAT
BUTTON (11) twice to repeat all tracks. Once
the CD ends, it will star over again from the
beginning of the CD. The REPEAT INDICATOR
(10) will remain on.
3 To cancel the repeat function, press the REPEAT
BUTTON (11) again until the REPEAT
INDICATOR (10) is off.
1 Press the PROGRAM BUTTON (6). " 01" will
shown on the display and the PROGRAM
INDICATOR (5) will flash.
2 Press the FORWARD SKIP BUTTON (3) or the
BACKWARD SKIP BUTTON (4) to select a
track.
3 Press the PROGRAM BUTTON (6) again to
store the selected track number.
4 Repeat steps 2 and 3 above to program other
tracks.
5 Press the PLAY/PAUSE BUTTON (14) to start
programmed playback and the PROGRAM
INDICATOR (5) will be on.
6 To erase the programmed sequence, press the
STOP BUTTON (12) twice or until the
PROGRAM INDICATOR (5) is off. Programmed
tracks will also erase when the CD DRAWER
(19) is opened.
NOTE: Maximum of 20 tracks can be programmed
to play in any order.
CD Operation