Crosley Radio CR-12DI Stereo System User Manual


  Open as PDF
of 7
 
Basic OperationBasic Operation
Set Up
1.Place the jukebox stand on a flat level surface where you
would like the jukebox to be located. With the help of another
person, carefully lift the jukebox onto the stand.
2.Place the keyboard and monitor in the drawer of the
jukebox stand for storage.
3.There is a stylus pen holder on the inside of the drawer for
storing the stylus pen when not in use.
Basic Operation
Powering Up Your Jukebox
Lights
To turn the on the lights, press the Light Control button (3).
Once the lights are turned on, the bubble tubes will start to bubble
in 10-15 minutes.
Note: The bubble tubes will not bubble without the lights being on.
S o u n d
1.Press the Main Power button (6).
This turns on the main power and amplifiers.
2.Press the Media Server Power button (5).
This will activate the Server.
3.Press the power button on the touchscreen monitor to
turn it on.
4.Once everything is powered up and iTunes is showing on
the monitor, the jukebox is ready for use. Use the included
stylus pen to operate the touch screen monitor.
5.See the included iTunes User Guide for information on
using iTunes.
Note: iTunes User Guide is also available for download at www.apple.com
Inserting A CD
1. To play a CD, insert the
CD into the CD slot.
2. Push the CD into the
jukebox until the internal computer grabs it and pulls it in.
3. To eject, press the eject button on the display window.
External Speaker Jacks
1.This jukebox is equipped with external speaker outputs.
These outputs allow the user to add additional speakers if
desired.
2.The speaker jacks for external speakers are located on the
back of the radio. Beside the speaker jacks is the Speaker
Switch (9) which is labeled (INT./EXT./MIX). The INT. setting
will only allow the internal speakers to play. Setting the
switch to EXT. redirects the power to the external speaker
jacks. To play the internal and external speakers together,
place the switch in the MIX position.
3.If you decide not to use the external speakers, be sure the
switch is on INT..
7 8
 previous next