Filter
Top Products
1 Remove packing materials from unit.
Note: Save all packing materials.
2 Remove plastic safety cover from A/C plug.
3 Remove tie from A/C cord
PASS
CLASSIC
ROCK
POP JAZZ
1 Make sure the unit is plugged in correctly to an
AC outlet.
2 Press the POWER button (4) to turn on the main
power. This button should be left pressed in even
when the unit is not in use. If the main power is
turned off, all preset radio stations will be lost
and will have to be reprogrammed.
3 Press the STAND BY button (2) to turn on the
unit power. The STAND BY button should be
used to turn the unit on or off.
4 Once the Power is turned on, press the
FUNCTION button (6/65) to switch between
Tuner/CD/iPod/Aux.
5 While listening to any of the above functions, you
may change the tone of the music by pressing
the EQ button (3/62). Each press of the EQ button
will toggle between the following settings:
6 You can also enhance the bass sounds by using
the BBS feature. Press the BBS button (21) to
turn this feature on.
General
Basic Operation
Programming Stations
1 Press FUNCTION (6/65) until TUNER appear
on the LCD display.
2 Press BAND (20) to select the desired turning
band: AM or FM.
3 Press and hold the SKIP+ (8/41) or SKIP -
(10/42) for one second to automatically tune into
to the next available station with a strong signal.
Repeat this procedure until the desired station
is reached.
4 To manually tune to a station, press SKIP+
(8/41) or SKIP- (10/42) repeatedly until the
desired stations is reached.
Note: For FM tuning, ((ST)) will show on the
LCD display when a stereo signal is
obtained.
Basic Operation
1 Press BAND (20) to select the desired turning
band: AM or FM.
2 Press SKIP+(8/41) or SKIP-(10/42) to tune to
the desired frequency.
3 Press “PROGRAM (15/45) , the “PROGRAM”
and “01” on LCD display will start flashing. The
current preset number will be displayed for
selection.
4 If you wish to store the radio station to another
preset number, press the PRESET-UP(18/40)
or PRESET-DOWN(16/43) to select the desired
preset number.
5 Press PROGRAM (15/45) on the unit again to
store the radio station. Repeat steps 3 to 6 to
store other preset radio stations.
6 Once all stations are programmed into memory,
use PRESET-UP (18/40) or PRESET-DOWN
(16/43) to select the programmed presets.
**If a button is not pressed within 5 seconds
during programming, the jukebox will
automatically exit program mode.
Note: A maximum of 10 radio stations for FM
and 10 for AM can be stored into memory.
iPod Operation
The iJuke features the Universal Dock(34) that uses
dock adapters that come with newer iPod models.
Before inserting your iPod, you will need to install
the correct dock adapter. By using the correct dock
adapter, you can insert any iPod with a dock
connector. If you have an older iPod model that did
not come with a dock adapter, they are available on
our website at www.crosleyradio.com or by calling
us at 1-866-Crosley. While docked, the iJuke will
also charge your iPod. To connect your iPod, follow
the steps below. If you’re iPod doesn’t have a dock
connector, you can connect it to the unit by using
the Auxiliary Cable that is supplied.
Note: If your iPod does not have a dock connector, use
the supplied Auxiliary Cable and hook your iPod
to the Auxiliary Input (Aux In) jack on the back
of the unit.
3 Press the skip+(8/41) or skip-(10/42) button to
select the desired track.
4 Press the play(7/44) button to start playback.
5 Press the stop(9/47) button to stop the playback.
1 Press the power button to turn iJuke on.
2 Press the function(6/65) button until “iPod”
appears on LCD display.
iPod Operation
Radio Operation
Unpacking
1
Unwind the AC POWER CORD (33) at the back
of the unit and connect it to a power outlet.
2 Plug A/C cord into appropriate outlet.
Note: This product may be equipped with a
polaized alternating-current line plug (a
plug having one blade wider than the
other.) This plug will fit into the power
outlet only one way. This is a safety
feature. If you are unable to insert the plug
fully into the outlet try reversing the plug,
if the plug should still fail to fit, contact
your electrician to replace your obsolete
outlet. Do not defeat the safety purpose
of the polarized plug.
3 Install 2 AAA batteries (not included) in
remote control.
4 Plug A/C cord into appropriate outlet.
AC
Polarized Plug
Power Source
6
7