Filter
Top Products
p. 33
glossary of terms (for setup)
Stereo
Music with two separate channels, usually a left and right
channel.
Mono
Music with only one channel.
Crossover
An electronic device that separates high and low
frequencies and sends them to dierent outputs. The sepa-
rate signals are usually sent to a high out and a low out.
Bi-amp
The separation of high and low frequencies with a cross-
over, using separate speakers and power amps for each.
Full Range
Both high and low frequencies together in a single channel.
Program
The signal that is plugged into the amplier.
Hi-Pass
Allows only the high frequencies to pass, blocking the low
frequencies.
Low-Pass
Allows only the low frequencies to pass, blocking the high
frequencies.
Mid/High
The speaker designed to play everything but the low
frequencies.
Sub
The speaker designed for low frequencies only.
Parallel
Both speakers or inputs have the same signal. When
referring to speakers, this means plugging the second
speaker into the rst speaker and so on.
setup
c