Filter
Top Products
connecting inputs
Input connections are made via the three-pin XLR (pin 2+) or 6.3 mm plug “Combi”
connectors on the rear panel of the amplifier. The inputs are actively balanced. The
input overload point is high enough to accept the maximum output level of virtually
any signal source.
connecting outputs
All models have two output (speaker) connections per channel. Cables can be
connected with banana plugs, spade lugs or bare wire to the five-way binding posts. The
preferred method is connection via the Speakon
®
connectors.
Output terminals are hazardous live and the external wiring connected to
these terminals requires installation by an instructed person or the use of ready-
made leads or cords.
CPX
TM
owner’s manual
p. 14
installation
2
inputs
outputs