Filter
Top Products
4
Tuning
Pre-sets
Tuning
Pre-sets
MEMORY
MW LW
FFMM
AM
TIMER
SSTTEERREEOO
kHz
MMHHzz
MEMORY
MW LW
FFMM
AM
TIMER
SSTTEERREEOO
kHz
MMHHzz
MEMORY
MW LW
FFMM
AM
TIMER
SSTTEERREEOO
kHz
MMHHzz
OPERATING THE T50
Manual and Pre-Set tuner operation
The large control knob on the right side of the panel has two functions.
First, it will manually tune the radio up and down smoothly to receive
stations on FM or AM displaying the frequency, band, centre tuning,
and
RDS station name, if transmitted
The second function is to select Pre-Set stations from the tuner’s
memory, acting like a rotary switch.
The frequency of the station will be displayed for a few seconds and may be
replaced with the station ID. The Pre-Set channel will only show when the tuner
is in Pre-Set mode, selected by the MODE button (which toggles between the
two functions).
The T50 will remember the last tuned frequency, station ID or pre-set after
switching off, so it can be restored when switching back on.
NB. The last tuned station will only be remembered if it has been left unaltered
for 1 minute before switching off..