Filter
Top Products
23
SPA-1400/1400C Rack Mount Power Amplifier
Installation Notes / Mounting Dimensions:
The SPA-1400/1400C is specifically designed to be rack mounted, either as a permanent fixture or in a “mobile” rack case. As
with any large, heavy object, a proper installation could mean the difference between success and disaster.
The front of the unit is designed to attach to standard rack rails. The four outermost holes correspond to the screw holes on
standard rack rails (2 rack spaces in height). Use only 10-32 threaded rack screws with large heads (such as a truss heads). The
use of nylon rack mount washers between the screw heads and the faceplate will keep the faceplate from being scratched. Your
Crate Pro Audio dealer can help supply you with the necessary hardware.
Due to the depth and weight of the SPA-1400/1400C, a set of rear support holes have been provided. It is highly recommend-
ed that the installer use these holes to support the rear of the amplifier. A support rail, shelf, or bracket can be attached to the ampli-
fier and then to the installation enclosure. One word to keep in mind when considering the related hardware for this: overkill.
More is better when it comes to a secure installation: a little extra time spent on installing a heavy object more than offsets the
possible losses that could be incurred if the object were to be damaged due to inadequate support.
The dimensions below are provided to assist you and/or your installation engineer in securely mounting the amplifier.
19.00"
17.25"
3.48"
3.00"
INDICATES CENTER OF GRAVITY
15.80"
16.10"
1.63"
17.73"
17.60"
17.30"
1.75"
6.0"
.87"
10.0"