Filter
Top Products
QQUUIICCKK SSTTAARRTT
DX-112/212 Digital Guitar Amplifier
2
MMaakkiinngg SSoouunndd::
• You may want to start out with the Master
control turned down low, since this amp
can get LOUD.
• Connect your guitar, plug in the amp and
turn it on.
• Select the manual mode by pressing the
MAN button on the keypad.
• Adjust the Gain control to get the amount
of gain you want.
• Try out the amp models by turning the
Amp Selector knob.
• Use the Bass, Mid, Treble and Channel
Level controls to change the tone and vol-
ume. The EQ settings will vary depending
on the amp model you choose.
• Choose a digital effect by turning the
Effects Selector knob.
• Modify the chosen effect by turning the
Effect Adjust control.
• Adjust the reverb by turning the Reverb
Level and Depth controls.
• Try out the factory presets by pressing the
numbered buttons and the A/B button on
the Keypad.
•When first turned on, the A/B button is
not lit, and the numbered buttons recall
presets 1-5 (bank A). When you press the
A/B button it lights up, and the numbered
buttons recall presets 6-10 (bank B).
POWER
Try out the
factory presets
(bank A,1 – 5;
bank B, 6 – 10)
(If you need
to ask, ...)